Electrical Engineering
Best Electrical Engineering institute in Uttarakhand
- The courses of Electrical Engineering provide to illustrate practical and theoretical aspects of basic electrical devices, circuits, networks, electrical machines, power electronics, control system, industrial drives and control transducers and high voltage engineering etc.
- Computer-Aided Design and Database Management Systems have acquired a position of high relevance in which electrical engineers are able to do a lot.
- The industrial and technological developments of the country depend upon how efficiently the electrical energy is utilized.
Vision
To impart high standard global learning environment and research activities with advanced technology in the interdisciplinary field producing quality engineers, industrial professionals, and researchers with good ethical values & moral responsibilities towards society.
Mission
- To provide state of art learning facilities to aspirant engineering students at undergraduate level with continuous exposure and interaction with the outside world.
- To prepare & train the students with current needs of industry and society for sustainable development of the nation.
- Promotion of excellence in education and research by inculcating independent critical thought and scientific temper.
Admission Procedure
- Admission for 1st year B.Tech. course through Uttarakhand State Online Counseling or through direct Admission on the basis of 10+2 marks (PCM).
- Admission for the lateral entry of B.Tech. course through Uttarakhand State Online Counseling (UKSEE) or through direct Admission on the basis of Diploma/B.Sc. marks.
S.No. | Name of Equipment |
01 | Single Phase Energy Meter Trainer Kit |
02 | Series & Parallel LCR Kit |
03 | Verifications of Network Theorems Kit |
04 | DC Motor -Generator set |
05 | DC Shunt Motor Panel Kit |
06 | Audio Frequency Oscillator |
07 | Three Phase Induction motor Trainer Kit |
08 | Single Phase Transformer Trainer Kit |
S.No. | Name of Equipment |
01 | Network Theorem trainer 1 |
02 | Network Theorem trainer 2 |
03 | Two port network-trainer |
04 | Interconnection of two port network trainer |
05 | Transient response trainer |
06 | Bread board |
S.No. | Name of Equipment |
01 | Single Phase Transformer Kit |
02 | Meter Demonstrator |
03 | Single Phase Auto transformer |
04 | Sumpner’s Test of single phase transformer |
05 | Hopkinson’s Test of DC Machine |
06 | DC Machine Kit |
07 | Coil Winding Machine |
08 | Compound Motor Compound Generator |
09 | Swinburn’s Test |
10 | Lamp Load |
11 | Rheostat 5 Amp, 110 Ohm |
S.No. | Name of Equipment |
01 | To study synchronization of an alternator |
02 | O.C. & S.C. Test on Synchronous Machine |
03 | Study of Xd and Xq of a Salient pole Synchronous Machine by Slip Test |
04 | To Plot V and Inverted V curve of Synchronous Motor |
05 | To Study Speed Control of three phase Induction Motor by keeping V/f ratio constant |
06 | Load Test on three phase Induction Motor |
07 | No load and Block Rotor test on three phase Induction Motor |
08 | Speed Control of three phase Induction Motor by varying supply voltage |
09 | No load and Block Rotor test on three phase Induction Motor |
10 | Load Test on three phase Induction Motor |
11 | No load and Block Rotor test on single phase Induction Motor |
S.No. | Name of Equipment |
01 | Kelvin’s Bridge Trainer Kit |
02 | Displacement Measurement Trainer Kit |
03 | Owen’s Bridge Trainer Kit |
04 | Thermocouple Demonstration Set Up Kit |
05 | Anderson’s Bridge Trainer Kit |
06 | Pressure Measurement Trainer Kit |
07 | RTD Demonstration Set Up Kit |
08 | De Sauty’s and Schering Bridge Trainer Kit |
09 | Maxwell’s Bridge Trainer Kit |
10 | Load Cell Sensor |
11 | Lissajous Pattern Trainer Kit |
12 | Cathode Ray Oscilloscope |
S.No. | Name of Equipment |
01 | Transmission Line Training System |
02 | Three phase Synchronous Machine |
S. No. | Name of Equipment |
01 | Linear system simulator |
02 | PID temperature controller |
03 | Speed control of DC motor (Open and close loop) |
04 | Speed control of universal motor |
S. No. | Name of Equipment |
01 | Power Electronics Trainer (Model XPO-PE) |
02 | IGBT/MOSFET Inverter Panel/PE6 |
03 | Converter/Inverter Panel/PE1 |
04 | dv/dt Protecting and firing panel/PE2 |
05 | Power Scope (SM901) |
06 | Digital Oscilloscope (2.5Gsa/s) |
07 | 3 Phase HV Thyristor control trainer (Model XPO-APPE) |
08 | Function Generator |
09 | Differential Power Scope |
S.No. | Name of Equipment |
01 | Over Current Relay |
02 | Secondary Current injector unit for Over Current Relay |
03 | Transmission Line Training System |
04 | Percentage Biased Differential Relay Testing Kit |
05 | Earth fault Relay Testing System |
06 | Motorised Oil Test Kit |
S. No. | Name of Equipment |
01 | Single/Three phase AC Voltage controller |
02 | Speed control of slip ring induction motor by static rotor resistance |
03 | Study of speed control using MOSFET chopper |
04 | Speed control of DC motor (Open loop and close loop) |
05 | Single phase Bridge converter Drive |
06 | Measurement of Xd and Xq of three phase synchronous machine. |
07 | Speed control of slip ring induction motor (Slip power recovery control scheme) |
08 | VSI FED three phase induction motor drive |
09 | CSI FED three phase induction motor drive |